5x5 Hinge Top (2-gang) without base

Direct Bury Applications | Rated up to 60 Amp

5×5 Hinge Top (2-gang) without base2023-03-15T20:12:16+00:00

Industrial grade durability for in-ground use

Freestanding direct bury power pedestal rated up to 60 Amp. Easy to install and constructed from heavy-gauge stainless steel that can withstand rugged conditions. Welded tamper-proof cover will never need to be replaced. Perfectly suited to power everything from personal devices to outdoor equipment and food trucks.

cULus Listed: Standard 1773. Rated NEMA 3R. ADA compliant heights available. Rated for 60A applications.


Receptacles not supplied.

Product Information

Material14-gauge 304 Stainless Steel (Standard); optional upgrade to 316
ConstructionWelded pedestal body & cover with removeable access panel
FinishOutdoor rated powder coat paint (standard and custom), brushed stainless
Heights42“, 48“, 54” (24" must be buried below grade)
Amperage60 amp max
HardwareStainless steel grounding hardware (pre-installed)
DevicesNot supplied
Device MountRemovable GFCI device mounting plate insert included
CoverAuto-closing cover provides protection to meet while-in-use requirements
ApplicationMay be ordered with a divider for power and data
CustomizationAdded receptacle opening(s) and custom powder coat options
InstallationOpen bottom to accommodate two 1-1/2" conduit raceways and side wire slot entry
ComplianceUL Listed: Standard 1773. Rated NEMA 3R. ADA compliant heights available.

Model Options

Power Only Applications

Drawings linked to part numbers.

High and Low Voltage Applications

Drawings linked to part numbers.

*insert color code after HT: : B = black, G = gray, BRZ = bronze, GN = Green, BR = brown, CSTM = custom color

Black (B)

Gray (G)

Bronze (BRZ)

Green (GN)

Brown (BR)

Custom (CSTM)

Brushed S.S. (SS)

Frequently Asked Questions<

Is the cover lockable while in-use?2023-02-10T15:58:07+00:00

Yes, hinge top models have an attached stainless steel auto-closing lockable cover that provides protection to meet while-in-use requirements for 15 and 20A devices. 5×5 model covers are for aesthetics only when used with 30 – 60A devices.

What is the diameter of the hole that allows for a lock?2022-04-08T19:45:11+00:00

The diameter of the locking hole is .300”.

Is mounting hardware included for the pad mounted models?2023-02-10T15:59:12+00:00

Yes, stainless steel mounting hardware kits are included. See the UL installation instructions for details:
Instructions for models with integral base
Instructions for models with internal bracketing

Are receptacle mounting plates included?2022-04-20T17:59:51+00:00

Yes, each unit comes with a removable receptacle mounting plate insert. Refer to each model page for details.

What type of material are the pedestals made from?2022-04-20T17:57:54+00:00

All products are made from heavy gauge stainless steel and available in type 304 or 316.

Are the pedestals customizable?2023-02-10T15:32:13+00:00

All products may be ordered in a custom color (paint chip required). There are multiple device mounting plate inserts available with the 4×4 and 5×5 hinge top models.

Where are the pedestals manufactured and sold?2023-02-10T15:00:48+00:00

Pedoc is located just outside of Chicago, IL where all products are manufactured and sold.

Will the pedestals accommodate circuit breakers and/or meters?2022-04-20T17:25:29+00:00

No, not at this time.

Are receptacles included or available to purchase through Pedoc?2022-12-28T13:57:23+00:00

A removable receptacle mounting plate insert that will accept a standard GFCI decora receptacle is included with each unit.

We do not sell or supply receptacles. Please refer to your preferred electrical supply house.

How should the pedestals be installed?2023-02-10T14:53:42+00:00

Please see the “UL Installation Instructions” document for details.

What size concrete base is recommended for the pad mounted models?2023-02-10T15:38:59+00:00

Contact your design engineer, contractor, or building inspector for guidance. See the installation instructions for pedestal base and mounting details:
Instructions for models with integral base
Instructions for models with internal bracketing

How do I get a submittal drawing?2022-04-20T17:37:23+00:00

Refer to each model page for drawings, specification info and UL installation instructions.

What is the warranty policy?2023-02-10T15:44:16+00:00

Pedoc includes a one-year manufacturer’s warranty.

How do I get close-out documents?2022-04-20T17:27:18+00:00

Please refer to the model page for drawings, spec sheets and installation instructions. Contact info@pedocpower.com if additional information is needed.

Will the access panel on the direct bury models be below grade?2023-02-10T15:43:05+00:00

Per our UL listing, the direct bury models must be buried at least 24” below grade. The 48” and 54” will allow enough space for the full panel to be accessed.

Can the pedestals be divided for power and data?2023-02-10T15:02:26+00:00

2-gang models may be ordered with an internal dividing channel to separate high and low voltage.

Are the pedestals UL Listed?2023-02-10T15:04:46+00:00

Yes, UL listed in the USA and Canada: Standard 1773 | Rated NEMA 3R | ADA compliant heights available

Are your pedestals rainproof (NEMA3R) and suitable for wet locations?2023-02-10T15:33:34+00:00

Yes, Rated NEMA 3R | cULus Listed: Standard 1773 | Options that meet ADA minimum 15” receptacle height requirement

Go to Top