Attractive solution for everyday powering
With a built-in tamper-proof cover and welded stainless-steel integral base, this durable 1-gang receptacle power pedestal safely protects typical outdoor wiring. Perfect for temporary power to trees for holiday lighting, personal devices, golf cart charging and many other outdoor applications.
cULus Listed: Standard 1773. Rated NEMA 3R. ADA compliant heights available. Rated for 20 Amp applications.

Devices not supplied.
Product Information
Material | 14-gauge 304 Stainless Steel (Standard); optional upgrade to 316 |
Heights | 18", 24", 30", 36", 42", 48" |
Construction | Welded pedestal body, base and lockable while-in-use weatherproof cover |
Amperage | 20 amp max |
Cover | Auto-closing cover provides protection to meet while-in-use requirements |
Receptacle mount | Removable receptacle mounting plate included |
Receptacles | Not supplied; can accommodate 15 – 20A NEMA rated receptacles (must be weather-resistant) |
Hardware | Pre-installed SS grounding hardware; anchoring hardware included |
Installation | Open bottom to accommodate two 1-1/2" conduit raceways |
Finish Options | Outdoor rated powder coat paint (standard and custom), brushed stainless |
Customization | Custom powder coat option |
Compliance | UL Listed: Standard 1773. Rated NEMA 3R for wet locations. ADA compliant heights available. |
Additional | Devices not supplied |
Model Options
Drawings linked to part numbers. Please note that the divided models are being phased out and no longer available for make-per-order purchase. Select from the alternate models identified below or contact us at info@pedocpower.com for remaining stock.
Height | 1-gang for Power Only (drawings linked) | Divided for High and Low Voltage (discontinued) |
18" | 1P18-C-HT-* or 1P18-SS-HT | 18" tall alternates: 18" 4x4 Divided Flush Mount - or - 18" 5×5 Divided Hinge Top with Integral Base |
24" | 1P24-C-HT-* or 1P24-SS-HT | 24" tall alternates: 24" 4x4 Divided Flush Mount - or - 24" 5x5 Divided Hinge Top with Integral Base |
30" | 1P30-C-HT-* or 1P30-SS-HT | 30" tall alternates: 30" 4x4 Divided Flush Mount - or - 30" 5x5 Divided Hinge Top with Integral Base |
36" | 1P36-C-HT-* or 1P36-SS-HT | 36" tall alternate: 36" 5x5 Divided Hinge Top with Integral Base |
42" | 1P42-C-HT-* or 1P42-SS-HT | 42" tall alternate: 42" 5x5 Divided Hinge Top with Integral Base |
48" | 1P48-C-HT-* or 1P48-SS-HT | 48" tall alternate: 48" 5x5 Divided Hinge Top with Integral Base |
*insert color code after HT: : B = black, G = gray, BRZ = bronze, GN = Green, BR = brown, CSTM = custom color
Black (B)
Gray (G)
Bronze (BRZ)
Green (GN)
Brown (BR)
Custom (CSTM)
Brushed S.S. (SS)
Frequently Asked Questions
Yes, hinge top models have an attached stainless steel auto-closing lockable cover that provides protection to meet while-in-use requirements for 15 and 20A devices. 5×5 model covers are for aesthetics only when used with 30 – 60A devices.
The diameter of the locking hole is .300”.
Yes, stainless steel mounting hardware kits are included. See the UL installation instructions for details:
Instructions for models with integral base
Instructions for models with internal bracketing
Yes, each unit comes with a removable receptacle mounting plate insert. Refer to each model page for details.
All products are made from heavy gauge stainless steel and available in type 304 or 316.
All products may be ordered in a custom color (paint chip required). There are multiple device mounting plate inserts available with the 4×4 and 5×5 hinge top models.
Pedoc is located just outside of Chicago, IL where all products are manufactured and sold.
No, not at this time.
A removable receptacle mounting plate insert that will accept a standard GFCI decora receptacle is included with each unit.
We do not sell or supply receptacles. Please refer to your preferred electrical supply house.
Please see the “UL Installation Instructions” document for details.
Contact your design engineer, contractor, or building inspector for guidance. See the installation instructions for pedestal base and mounting details:
Instructions for models with integral base
Instructions for models with internal bracketing
Refer to each model page for drawings, specification info and UL installation instructions.
Pedoc includes a one-year manufacturer’s warranty.
Per our UL listing, the direct bury models must be buried at least 24” below grade. The 48” and 54” will allow enough space for the full panel to be accessed.
2-gang models may be ordered with an internal dividing channel to separate high and low voltage.
Yes, UL listed in the USA and Canada: Standard 1773 | Rated NEMA 3R | ADA compliant heights available
Yes, Rated NEMA 3R | cULus Listed: Standard 1773 | Options that meet ADA minimum 15” receptacle height requirement