Features

With a built-in tamper-proof cover and welded integral base, this durable 2 to 3-gang receptacle power pedestal safely protects typical outdoor wiring. Rated for 30A applications. May be ordered with a divider for high and low-voltage applications. Multiple receptacle mounting plate configurations. Can be used to power food trucks, engine block heaters, personal devices, maintenance equipment, and other applications.
UL Listed: Standard 1773. Rated NEMA 3R.
Receptacles not supplied.
Model Numbers (Drawings Linked)
“C” = Coated Stainless Steel Finish: *INSERT COLOR: B = black, G = gray, GN = Green, BR = brown, BRZ = bronze, CSTM = custom color
“SS” = Polished/brushed stainless steel finish
Stainless steel construction (powder coated or brushed finish)
Black
Gray
Green
Brown
Bronze
Custom
Brushed SS

Product Information
Material: Standard | 304 Stainless Steel: 14 gauge body and cover, 7 gauge base |
Material: Upgrade | 316 (marine grade) Stainless Steel: 14 gauge body and cover, 7 gauge base |
Construction | Welded pedestal body, base and weatherproof cover (lockable while-in-use) |
Finish Options | Outdoor rated powder coat paint (standard and custom), brushed stainless |
Height | 18", 24" 30", 36", 42" 48" |
Amperage | 30 amp max |
Hardware | Stainless steel grounding hardware (pre-installed) and mounting anchors included |
Application | May be ordered with a divider for high and low voltage (data) |
Customization | Added receptacle opening(s) and custom powder coat options |
Installation | Open base to accommodate two 1-1/2" conduit raceways |
Receptacle Mount | Mounting plate included to align with standard GFI decora receptacle(s) |
Compliance | UL Listed, NEMA 3R (weatherproof) for outdoor locations |
Additional | Receptacle and devices not supplied |
Frequently Asked Questions
Yes, the hinge top models were specifically designed to close, and be locked, while in-use. There is a gap between the cover and the pedestal body to allow conduits to pass.
The diameter of the locking hole is .300”.
Yes, ¼” x 2-¼” anchoring kits are included with models 36” or less and 3/8” x 2.75” anchoring kits for 42″ and 48″ high models. Kits include stainless steel anchor bolts, washers, and acorn nuts.
Yes, each unit comes with a removable receptacle mounting plate insert. Refer to each model page for details.
All products are made from heavy gauge stainless steel and available in type 304 or 316.
Yes, we offer custom colors and can add additional receptacle openings. Please call us at (888)518-0330 to discuss your needs.
PEDOC is located just outside of Chicago, IL where all products are manufactured and sold.
No, not at this time.
A removable receptacle mounting plate insert that will accept a standard GFCI decora receptacle is included with each unit.
We do not sell or supply receptacles. Please refer to your preferred electrical supply house.
Please see the “UL Installation Instructions” document for details.
The mounting bases are made from 7 gauge stainless steel. The diameter for the standard models and one-gang hinge tops is 8″; 8-1/2″ for the two-gang 5×5 models. Contact your design engineer, contractor, or building inspector for guidance.
Refer to each model page for drawings, specification info and UL installation instructions.
PEDOC includes a one-year manufacturer’s warranty.
Per our UL listing, the direct bury models must be buried at least 24” below grade. The 48” and 54” will allow enough space for the full panel to be accessed.
Yes, all models may be ordered with a divider to separate high and low voltage.
The One Gang models are rated to 20 amp. The 5×5 models are rated to 30amp.
Yes. UL Listed: Standard 1773. Rated NEMA 3R.